English
14
Channel Setting in Group Mode
Press the SEL/ key in Group Mode to enter to
Channel Setting.
Press the or key to select “Auto Channel
Change Setting” or “Manual Channel Setting”.
The display shows the following:
Press the SEL/ key to enter to each setting.
Note: Press the MENU/GRP key to go back to
Idle status
Set Auto Channel Change
A channel number blinks and the Sub Code
segments show “ALL”.
Press the or key to select the channel.
Press key or SEL/ key to transmit Auto
Channel Change command.
Note: Press the MENU/GRP key to go back to
Channel Setting in Group mode.
Set Manual Channel in Group Mode
A channel number blinks and the Sub Code
segments show “MY”.
Press the or key to select the channel.
Now, Manual Channel is available.
Press the SEL/ key to exit from Manual
Channel setting.
Note: Press the MENU/GRP key to go back to
Channel Setting in Group mode.
Set All/Direct Call
Press key in Group Mode to enter All/Direct
Call Setting.
At first the user selects a type of Call from All
Call transmission or Direct Call Setting.
Auto Channel Change
Manual Channel
Setting
TLKRT7new.fm Page 14 Friday, May 23, 2008 9:18 AM
To Next Page
Loading...
