17
English
See LCD:
Press the (or ) key to change each
desired condition or number.
Press the SEL/ key to select it.
Press MENU/GRP key to exit to Menu idle
mode.
Note: In group mode, you cannot receive
transmissions from other radios unless
they are also set to the same channel and
same group code.
Set Group Mode
Press the SEL/ key to control Group Mode.
Choose “Y” or “N” by pressing the or key.
See LCD:
Choose "N" and press the SEL/ key to exit
from Group Menu.
Choose "Y" and press the SEL/ key to go to
Group Menu and Group Code setting.
Set Group Code
Group code is selectable from 0 - 121.
Sub-code segments indicate Group code.
To select a group code, press the key or
key to choose the Group code.
Press the SEL/ key to complete the Group
Code setting.
The radio enters “Ring Tone Setting Menu”.
Press MENU/GRP key to go back to Group
Menu.
Set Ring Tone
The user can select Ring Tone for a Direct Call.
There are 10 Ring Tones, these Ring Tones are
the same as Call Tones.
To select a Ring Tone, press the key or
key.
The selected Ring Tone sounds from speaker.
Set ID
Each radio in your group needs to be set to an
ID number from 1 to 16.
TLKRT7new.fm Page 17 Friday, May 23, 2008 9:18 AM
To Next Page
Loading...
