EasyManuals Logo

Motorola TLKR T92 H2O User Manual

Motorola TLKR T92 H2O
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
7
English
3. Press the PTT button to exit menu or Menu button to
continue set up.
In order to transmit your call tone to other radios, set up the
same channel and Interference Eliminator Code on your radio
and press Call Tone button.
Voice Operated Transmission ()
Transmission is initiated by speaking into the microphone of the
radio instead of pushing the PTT button.
1. Press Menu button 4 times until icon appears
on the display. The current setting (L1-L3) will flash.
2. Press or to select the sensitivity level.
3. Press the PTT button to exit menu or Menu button to
continue set up.
Note: There is a short delay between the time you start
talking and when the radio transmits.
Dual Channel Monitor
Enables you to scan the current channel and another channel
alternately.
To set another channel and start Dual Channel:
1. Press Menu button 5 times until the Dual Channel
icon appears. The Dual Channel will flash.
2. Press or to select the channel then press Menu
button.
3. Press or to select the Interference Eliminator Code.
4. Press the PTT button to exit menu or Menu button to
continue set up.
5. The radio starts to Dual Channel.
Note: If you set the same channel and code as the current
channel, Dual Channel Monitor OFF.
Silent Mode (Vibrate Alert)
Silent Mode (Vibrate Alert) notifies you that your radio is
receiving a message. This is useful in noisy environments.
When the alert is on, the radio vibrates once every 30 seconds
when you receive a message on the channel and code you set.
1. Press Menu button 7 times until Vibracall icon is
displayed. The current setting will flash.
2. Press or to change the setting to On/Off.
3. Press the PTT button to exit menu or Menu button to
continue set up.
Keypad Tones
You may enable or disable the speaker key tones. You will hear
the key tone each time a button is pushed.
1. Press Menu button 8 times until Keypad Tone icon
appears. The current setting On/Off will flash.
L3 = High Sensitivity for quiet environments
L2 = Medium Sensitivity for most environments
L1 = Low Sensitivity for noisy environments

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola TLKR T92 H2O and is the answer not in the manual?

Motorola TLKR T92 H2O Specifications

General IconGeneral
Purpose-
Maximum range10000 m
Operating frequency- MHz
On/off switchYes
Product colorBlack, Yellow
Transmit power500 mW
Battery life (max)16 h
Battery technologyNickel-Metal Hydride (NiMH)
Quantity2
Call rings quantity20
Weight and Dimensions IconWeight and Dimensions
Weight233 g
Dimensions (WxDxH)61 x 38 x 178 mm

Related product manuals