32
basics
•
If you want a different word (such as
Progress
), continue
pressing keypad keys to enter the remaining letters.
•
To enter numbers quickly, press and hold a number key
to temporarily switch to numeric mode. Press the
number keys to enter the numbers you want. Enter a
space to change back to iTAP mode.
•
Press
1
to enter punctuation or other characters.
tap mode
Press
#
in a text entry view to switch to tap mode. If you
don’t see
ìg
or
ìm
, press
M
>
Entry Setup
to set tap mode as
your primary or secondary text entry mode.
To enter text in tap mode, press a keypad key repeatedly to
cycle through the letters and number on the key. Repeat this
step to enter each letter.
For example, if you press
8
one time, your display shows:
Delete Send To
G
Msg
T
449
íg
After you enter
text, press the
Send To key to
enter
recipients.
After
2 seconds,
character is
accepted and
cursor moves
to next
position.
Character
displays at
insertion point.
Press the Delete
key to
delete
character to left of insertion
point.
To Next Page
Loading...
