58
calls
To speak during a PTT call
, hold your PTT key and speak
after the tone. Only one person can speak at a time.
To end the call
, press
o
. If nobody speaks for 20
seconds, the call ends.
To send a PTT alert
instead of a standard PTT call, highlight
a PTT contact in
PTT Contacts
and press the
Alert
key. The
contact’s phone rings or vibrates, and the contact can speak
first. If the contact does not respond, the call ends. You
cannot send alerts to groups.
answer a PTT call
When you receive a PTT call
, you hear a tone or alert
followed by conversation from the caller.
• To speak
when the caller stops speaking, hold your
PTT key and speak after the tone. Only one person can
speak at a time.
• To end the call
, press
o
.
If you change your
My Answer Mode
setting, your phone does
not automatically answer as described (see page 61).
When you receive a PTT alert
, press the PTT key and speak
after the tone. You can also press the
Ignore
key to cancel the
call.
Your phone displays
Missed Call
if you miss a PTT alert. It does
not display
Missed Call
when you miss a standard PTT call
unless you set
My Answer Mode
to
Manual
(see page 61).
CFJN1732B.book Page 58 Tuesday, December 6, 2005 6:29 PM
To Next Page
Loading...
