Getting Started - 25
Charging the Battery
New batteries are shipped partially charged. Before you can use
your phone, you need to install and charge the battery, as indicated
by the following instructions. Some batteries perform best after
several full charge/discharge cycles.
Note: When you charge the battery, the battery level indicator in
the upper right corner of the display shows how much of the
charging process is complete.
3 Push the battery
down and snap it
into place.
Do This
1 Plug the travel
charger into
your phone
with the
release tab
facing up.
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your phone indicates that the battery is fully
charged (
), press the release tab and
remove the travel charger.
Do This
Release tab
UG.GSM.book Page 25 Thursday, June 6, 2002 2:22 PM
To Next Page
Loading...
