28 - Getting Started
Adjusting Volume
Press the up and down
volume keys to:
• increase and decrease
earpiece volume during a
call
• increase and decrease
the ringer volume setting
when the idle display is visible (flip must be open)
Tip: At the lowest volume setting, press the down volume key
once to switch to vibrate alert. Press it again to switch to silent
alert. Press the up volume key to cycle back to vibrate alert,
then ring alert.
• turn off an incoming call alert
Making a Call
4 If necessary, enter
your four-digit unlock
code and press
(
+
)
unlock your phone
The unlock code is originally
set to 1234. Your service
provider may change this
number before you receive
your phone.
Press To
1 keypad keys dial the phone number
Tip: If you make a mistake,
press
(
-
) to delete the
last digit, or press and hold
(
-
) to clear all digits.
Do This To
Volume
keys
UG.GSM.book Page 28 Thursday, June 6, 2002 2:22 PM
To Next Page
Loading...
