Motorola verve ones Read Me First

Turn on Bluetooth on your device.
Take one wireless earbud out of case,
and put it in your ear (Either L or R).
On your device, go to the Bluetooth menu to
pair & connect. You will hear "VerveOnes
connected" when pairing is complete.
Put the rst earbud back into the case. Take the
other earbud out of the case and put it in your
ear. Refresh your phone screen and repeat
Step 3 to pair the second earbud.
Now put the rst earbud back in your other ear.
After a few seconds you will hear "Earbuds
linked". You are now ready to play music via
your device.
Step 2: Pair with Bluetooth
Step 2: Pair with Bluetooth
3en
Tip: For each use, pull one earbud out of case and place in ear
and wait for “VerveOnes connected” prompt. Now remove
second earbud and place in other ear and wait for “Earbuds
linked” prompt. If earbuds fail to link, replace in case to reset
and remove again.
Note: The rst earbud will be connected to your device, the
second earbud will be linked to the other earbud.

Motorola verve ones Specifications

General

Brand	Motorola
Model	verve ones
Category	Headphone
Language	English