Motorola VM44-2 CONNECT - Power Saving Mode; View Multiple Cameras on Screen

Parent Unit Menu Options
18
4.8 Power Saving mode
1. Press the button and the menu bar will pop up.
2.
Press the < LEFT button or > RIGHT button until is
highlighted.
3. Press the + UP button or - DOWN button to select auto video off after 5 mins,
30 mins or 60 mins (if operating on batteries only).
NOTE
The audio will remain and you can press any key to switch the video back on.
4.9 View multiple cameras on screen
This function is only available when you have more than 1 Baby Unit
(Camera). When the Split Screen function is On, you can view multiple
cameras on the screen.
1.
Press the button and the menu bar will pop up.
2.
3.
Press + UP button or - DOWN button to select Split Screen On
/ Off .
4.
When the Split Screen function is On, you can press the < LEFT
button / > RIGHT button / + UP button / - DOWN button to swith
between cameras to hear the audio from the selected camera.
Press the < LEFT button or > RIGHT button until is highlighted.