30
customize
RF exposure guidelines, do not use or charge your
phone with either cover removed.
Caution:
The covers are made of plastic and can be
broken. Take care when removing or replacing any part
of your phone. When changing covers, you are
removing some of the phone’s outer protection.
Therefore, take extra care with your phone and avoid
exposure to dirt, dust, liquids (including condensation),
and static electricity. Replace all covers as quickly as
possible. Always use Motorola approved covers.
1
Remove battery
cover and battery,
then carefully but
firmly ease the
locating tabs from
the phone to
release the top of the cover.
2
Working down the
phone, release the
cover and slide it
off the end of the
phone.
3
Swap the keypad
to the new cover,
ensuring the top
and bottom tabs
are located
securely.
4
To apply the new cover, insert the tab at the
bottom of the new cover into the bottom of the
phone, then use your thumbs to press along the
sides of the cover as you fix it into place.
5
Replace the battery and cover.
To Next Page
Loading...
