Making and Receiving Calls
English
14
Receiving and Responding to a Radio Call
Once the channel, subscriber
ID or group ID is displayed,
you can proceed to receive
and respond to calls.
The LED lights up solid
green while the radio is
transmitting and blinks green
when the radio is receiving.
NOTE: The LED lights up solid green while the radio is
transmitting and blinks green rapidly when the radio is
receiving a privacy-enabled call.
To unscramble a privacy-enabled call, your radio must
have the same Privacy Key (programmed by your
dealer) as the transmitting radio (the radio you are
receiving the call from). See Privacy on page 50 for
more information.
Receiving and Responding to a Group Call
To receive a call from a group of users, your radio must be
configured as part of that group.
Procedure:
When you receive a Group Call (while on the Home screen):
1 The LED blinks green.
2 The first line of the display shows the caller alias, and the
RSSI icon. The second line displays the group alias and the
Group Call icon (in Digital mode only).
3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
4 Press the PTT button to respond to the call. The LED lights
up solid green.
LED
Indicator
NAG-LACR-EMEA.book Page 14 Monday, April 28, 2008 4:59 PM
To Next Page
Loading...
Need help?
General
