Motorola xpr6550 User Manual

Advanced Features
English
43
2 The display shows Text Message: <Subscriber/Group
Alias or ID>, confirming your message is being sent.
3 If the message is sent successfully, a tone sounds and the
display shows Message Sent.
OR
If the message cannot be sent, the display shows Message
Send Failed.
If the message fails to send, the radio returns you to the Resend
option screen (see Managing Fail-to-Send Text Messages on
page 43).
Managing Fail-to-Send Text Messages
You can select one of the following options while at the Resend
option screen:
• Resend
• Forward
• Edit
Resending a Text Message
Procedure:
1 Press N to resend the same message to the same
subscriber/group alias or ID.
2 If the message is sent successfully, a tone sounds and the
display shows Message Sent.
OR
If the message cannot be sent, the display shows Message
Send Failed.
Forwarding a Text Message
Select Forward to send the message to another subscriber/
group alias or ID.
Procedure:
1 Por Q to Forward and press N to select.
2 Por Q to the required alias or ID and press N to
select.
OR
Por Q to Manual Dial and press N to select.
Key in the subscriber ID and press N.
3 The display shows Text Message: <Subscriber/Group
Alias or ID>, confirming your message is being sent.
4 If the message is sent, a tone sounds and the display shows
Message Sent.
OR
If the message is not sent, a low tone sounds and the
display shows Message Send Failed.



NAG-LACR-EMEA.book Page 43 Monday, April 28, 2008 4:59 PM

Motorola xpr6550 Specifications

General

Channels	128
Emergency Button	Yes
Bluetooth	No
Keypad	Yes
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Frequency Range	VHF: 136-174 MHz, UHF: 403-470 MHz