Need help?Do you have a question about the MOTU UltraLite AVB and is the answer not in the manual?
General| Number of Preamps | 2 |
|---|---|
| Phantom Power | Yes |
| A/D Resolution | 24-bit |
| Analog Inputs | 8 |
| Instrument Inputs | 2 |
| Line Inputs | 6 |
| Line Outputs | 8 |
| Headphone Output | 1 |
| AVB Ports | 1 |
| Bit Depth | 24-bit |
| Dynamic Range | 117 dB (A-weighted) |
| Headphone Outputs | 1 |
| DC Coupled Outputs | Yes |
| Audio Interface Type | USB, Ethernet |
| Digital Inputs | 1 x Optical (ADAT, S/PDIF) |
| Digital Outputs | 1 x Optical (ADAT, S/PDIF) |
| MIDI I/O | In/Out |
| Computer Connectivity | USB 2.0, Ethernet |
| Simultaneous Channels | 18 in, 20 out |
| Sample Rates | 44.1, 48, 88.2, 96 kHz |
| Audio Outputs | 10 |
Core safety instructions for product operation and maintenance.
Critical warnings to prevent hazards.
Initial setup steps for rapid deployment.
How to access and use the web-based control interface.
Detailed controls for each input channel.
Detailed controls for output busses like Main Mix.
Dynamic range control for channels.
Details on onboard processing power and features.
Remote control capabilities and signal monitoring.
Hardware and operating system requirements.
Conditions requiring software installation.
Details on the software installer and drivers.
Connecting the device via USB.
Connecting the device via AVB Ethernet.
Connecting multiple interfaces using an AVB Switch.
Connecting for web app control via USB or Ethernet.
Setting the network clock master for synchronization.
Examples like Audio Interface, Stand-alone Mixer.
Using the device as a mixer without a computer.
Using the device as both interface and mixer.
Pre-use steps and web app configuration for DAWs.
Mapping audio signals to DAW inputs and outputs.
Routing DAW audio to the internal mixer.
Selecting the correct audio driver for host software.
Using the internal mixer for minimal monitoring delay.
Impact of buffer size on latency and CPU load.
Using the internal mixer alongside DAW mixing.
Details on onboard processing capabilities.
Detailed explanation of the EQ capabilities.
Explanation of the compressor's function and parameters.
Diagnosing issues with no sound or monitoring.
How to contact MOTU technical support.
Procedure for updating firmware online.
To Next Page
