MouKey MA20-1 - Connecting and Pairing; Wired Audio Connection; Bluetooth Pairing

AUX
vol put
-
-
+
+
or
vol put
-
+
or
44
1.Press the master volume control on the active speaker or press the "AUX"
button on the remote control to select LINE IN input. The indicator turns to red.
2.Using audio cable to connect audio source to the speaker.
3.Play your device and adjust the volume properly.
Matching:
1.Turn on speaker and switch to Bluetooth Mode by pressing the
Bluetooth button of the
remote control or press the master volume control on the back panel of
the active speaker. The colour of indicator will be blue.
2. Find the "set up section" on your source devices (mobile phones,
tablets, etc.) and search for nearby Bluetooth devices, you will find
“Moukey MA20-1” in the list.
3.Match your device to “Moukey MA20-1”
Note:
1.Bluetooth connectivity and compatibility may be different among
from different source devices, depending on the software versions of
source devices.
2.To enjoy the Bluetooth functions of this product more better, please
ensure your mobile device supports AZDP and AVRCP profile.
Speaker