Why won't my Moulinex dishwasher start?
Your Moulinex dishwasher might not start because the power supply isn't on. Ensure the dishwasher is turned on and the door is closed securely. Another possible reason is that the door hasn't been properly closed, so make sure to close it securely.
What to do if the Moulinex studio MINID2SL Dishwasher has suds in the tub?
If you find suds in the tub of your Moulinex dishwasher, it's likely due to using an improper detergent. Only use detergents specifically designed for dishwashers to avoid suds. If suds occur, open the door and let them evaporate. Then, close the door securely and start the soak wash cycle to drain the water. Repeat if necessary.
How to fix Moulinex studio MINID2SL Dishwasher not pumping out water?
If your Moulinex dishwasher isn't pumping out water, check the drain hose for any kinks that might be blocking the flow. Also, examine the filters, as a clogged filter can prevent proper drainage. Refer to the section on cleaning the filters for instructions.
Why are the dishes not clean in my Moulinex dishwasher?
If your dishes aren't coming out clean in your Moulinex dishwasher, it could be because the wash program selected is too gentle. Try selecting a more intensive program. Another reason might be that you're not using enough detergent or the detergent is unsuitable. Try using more detergent or switching to a different brand.
How to stop my Moulinex studio MINID2SL Dishwasher from being noisy?
A noisy Moulinex dishwasher can be caused by dishes rattling against each other or spray arms knocking against the dishes. To resolve this, rearrange the dishes, consulting the section on loading the basket. Also, refer to the section on loading the baskets to ensure proper placement.
What to do if the Moulinex studio MINID2SL Dishwasher keeps tripping the breaker?
If the fuse is blown or the circuit breaker tripped, replace the fuse or reset the circuit breaker. Additionally, remove any other appliances that are sharing the same circuit with the Moulinex dishwasher.
How to get dishes dry in Moulinex dishwasher?
If your dishes are not quite dry after a cycle in your Moulinex dishwasher, the rinse aid dispenser setting may not be high enough. Try adjusting the rinse aid dispenser setting to a higher level. Improper loading of the dishwasher can also affect drying, so refer to the section on loading the baskets for guidance.
Why does my Moulinex dishwasher have a stained tub?
A stained tub in your Moulinex dishwasher may be due to using a detergent with interior colorant. Make sure the detergent you use does not contain any colorant.
What to do if the rinse aid has run out in Moulinex studio MINID2SL?
If the rinse aid has run out or too little is being used in your Moulinex dishwasher, increase or refill the amount of rinse aid.
General| Place settings | 6 |
|---|---|
| Energy efficiency class | A |
| Noise level | 49 dB |
| Number of programs | 6 |
| Energy consumption per cycle | 0.61 kWh |
| Washing performance class | A |
| Drying performance class | A |
| Water consumption per cycle | 6.5 L |
| Dimensions (H x W x D) | 55 x 50 cm |
Connects the appliance to the water source, detailing hose connection and initial water run.
Guides on correctly positioning dishes and cookware in the basket for optimal wash results.
Provides instructions on how to load silverware and sharp utensils safely and effectively.
Provides instructions on disassembling, cleaning, and reassembling the main and fine filters.
Lists common error codes, their meanings, and possible causes for appliance malfunctions.
To Next Page