Moulinex studio MINID2SL - Error Codes

Streaking and
staining on the
dishes
The rinse aid
dispenser setting is
not high enough.
Adjust the rinse aid dispenser setting.
The dishes are
not quite dry.
Improper loading Refer to “Loading the Baskets”.
The rinse aid has run
out or too little is
being used.
Increase or refill the amount of rinse aid.
Wrong programme
selection
Choose a programme with long washing
time.
Error codes
When some malfunctions occur, the display will show the following error codes to warn
you:
Error code
Meaning
Possible cause
EF
Longer inlet time.
Tap is not opened, or water
inlet is restricted, or water
pressure is too low.
E3
Failure to reach required
temperature
Heating tube or thermistor
malfunctions.
E4
Overflow
Some dishwasher parts are
leaking.
E9
Button pressed for more than 30
seconds.
Water or something on the
button
WARNING!
If overflow occurs, turn off the main water supply before calling service.
PRODUCT FICHE
This product fiche has been setup in conformity with EU Regulation No 1059/2010.
Brand
Moulinex Studio
Model
MINID2SL
Standard place settings
2
Energy efficiency class ❶
A
Annual energy consumption ❷
12 kWh/annum5
Energy consumption of the standard
cleaning cycle
0.43 kWh/cycle
EN-17