Photo Delay - (default 1 minute) -The photo delay determines the number of
minutes between pictures when an animal is detected and remains in range.
To change the delay time, press the UP/DOWN buttons to highlight the desired
setting. Press the ENTER button to save the setting and return to the Camera Setup
Menu. Additional menu choices are available by hitting the UP/DOWN button
when the first/last option is highlighted. Photo Delays can be set to 5, 15 and
30 seconds, 1, 5, 10, 30 and 60 minutes.
PHOTO DELAY
1 MIN
Multi-Shot - (default OFF) - When the Game Spy Camera is configured for
TRAIL in the capture mode screen, the camera can take 2 shot standard or 3 Shot
standard, 2 Shot Fast, 3 Shot Fast, and 4 Shot Fast each time an animal is
detected. There is an approximate 3-4 second delay between pictures when the 2
shot standard or 3 Shot standard setting is selected. When the 2 Shot Fast, 3 Shot
Fast, and 4 Shot setting is selected, the camera will take the selected amount of
photos within 1-2 seconds. To choose the desired setting press the ENTER button
to enter the Multi Shot settings. Press UP or DOWN to select the desired number
of photos. Then press ENTER again to return to the camera setup menu.
MULTI SHOT
OFF
Video Resolution - (default High) -Video resolution can be set to LOW or HIGH.
The higher the quality of the video, the more memory it consumes. However,
higher quality videos have higher resolution.
Low: 352 x 192 @ 24fps High: 720 x 400 @ 24fps
Press the UP/DOWN buttons to highlight the desired setting. Press the ENTER
button to save the setting and return to the Camera Setup Menu.
VIDEO RESOLUTION
HIGH
M-80BLX GameSpy Digital CameraM-80BLX GameSpy Digital Camera Page 11
Page 6
ADVANCED INFORMATION (cont.)
VI
INFORMATION ON PICTURE
The info strip below will appear at the bottom of the photo/video:
Temp. Moon Date Time Camera Name
Moon Phase
The icons for the moon phase are as follows:
To Next Page
Loading...
Need help?
General
