Moultrie S-Series - Confirm Security Code; Menu Map; Reset to Default Settings; Upgrade Firmware

MENU MAP
314
SYSTEM OPTIONS (cont.)
J
Upgrade Firmware
The firmware version is displayed.
YES - To upgrade rmware.
NO - Keep current firmware.
NOTE: This operation should only be performed when rmware update is required.
Conrm Security Code
Once a Security Code has been entered, the camera will prompt you to verify the code.
This will keep you from mis-entering a code or seting a code inadvertantly.
Reset to Default settings
You can reset your camera to the factory default settings.
Choose either YES - all setups restored to factory default or NO - keep custom settings.
SYSTEM SETTINGS
CONFIRM SECURITY CODE
00000
SYSTEM SETTINGS
FACTORY RESET
X Do Not Reset
Factory Reset
SYSTEM SETTINGS
UPGRADE FIRMWARE
X No
Yes
50S50i-140919
MAIN MENU
TIMELAPSE
MOTION + TL
GENERAL SETTINGS
DETECTION DELAY
PIR SENSITIVITY
MULTI-SHOT
PHOTO OR VIDEO
RESET OPTIONS
TL INTERVAL
TL PROGRAM #1
TL PROGRAM #2
RESET OPTIONS
PHOTO/VIDEO
SETTINGS
INFOSTRIP SETTINGS
MEMORY SETTINGS
SYSTEM SETTINGS
INFOSTRIP SETTINGS MEMORY SETTINGS
SYSTEM SETTINGS
DATE & TIME
CAMERA NAME
TEMPERATURE F/C
INFOSTRIP ACTIVE
ERASE ALL IMAGES
SECURITY CODE
FACTORY RESET
UPGRADE
FIRMWARE
MOTION FREEZE
PHOTO RESOLUTION
VIDEO RESOLUTION
VIDEO LENGTH
GENERAL SETTINGS
MOTION DETECT
MANAGED
MEMORY
PHOTO/VIDEO
SETTINGS