Mount-It! MI-4352LT - User Manual

English
Installation Instruction
1
UNPACKING INSTRUCTIONS
! Carefully open the carton, remove contents and lay out on cardboard or other
protective surface to avoid damage.
! Check package contents against the Supplied Parts List in the next page to assure
that all components were received undamaged. Do not use damaged or defective
parts.
! Carefully read all instructions before attempting installation.
IMPORTANT SAFETY INFORMATION
! Install and operate this device with care. Please read this instruction before
installation, and carefully follow all instructions contained herein. Use proper safety
equipment during installation.
! Please call a qualified installation contractor for help if you don't understand these
directions or have any doubts about the safety of the installation.
Do not use this product for any purpose or in any configuration not explicitly specified
in this instruction. We hereby disclaims any and all liability for injury or damage
arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

Summary

Unpacking Instructions

Important Safety Information

Supplied Parts List

Step 1: Install the Pole to the Desktop

Option A: Desk Clamp Install

Instructions for installing the pole using a desk clamp.

Option B: Grommet Base Install

Instructions for installing the pole using a grommet base.

Step 2: Install Arm to the Pole

Step 3: Attach the VESA Plate

Step 4: Slide the Monitor onto the Head of Swivel Arm

Step 5: Make the Necessary Adjustments

Step 6: Manage Wires and Store Allen Keys

Mount-It! MI-4352LT Specifications

General

Product Name	Mount-It! MI-4352LT
Category	Racks & Stands
Material	Steel
Weight Capacity	110 lbs
Wheel Type	Locking Casters
Screen Size	37 to 70 inches
Color	Black
Warranty	5 Years
Compatibility	Flat panel TVs
Adjustability	Tilt
Mounting Type	Floor
Product Type	Mobile TV Stand
VESA Compatibility	200x200 to 600x400