Mountain Buggy swift - Page 11

10
Transporting your buggy
A special locking strap is located on the cross brace bar, or for the swift on the handlebar. Wrap this
strap around the axle and then clip fasteners together to secure buggy closed when folded.
Tyre Pump
To use a pump, remove the connection hose and attach relevant ends to top of pump and wheel valve.
Donotovertighten.Ensurethereisnotensionontheconnectionhosewhileinatingtyre.
Protective Covers
Sun
Zip the sun cover to the buggy sunhood and fasten the
toggles to the sides and attach the strap under the foot plate.
Note:duosuncoverfastensoverthesunhood.
Storm
Fitthecoveroverthesunhoodandfastenthetogglestothe
top and sides, and attach the strap under the foot plate.
Important
• Removethestormorsuncoverbeforefoldingthebuggy
to avoid damage.
• Remembernottoleavethestormcoveroninwarm
conditions, and check your child’s comfort frequently.
• Always check your child to make sure they are not
overheating.
strap
strap
Top Tips
Handbrake Care (terrain only)
As the brake wears you can adjust it by unscrewing the
locking collar and winding out the brake adjustor until brake
tension is correct. Then rewind locking collar back in.
Brakepads (terrain only)
If the brakes start making scrapping noises then check brake
pads are not worn.
locking collar
brake
adjustor
brake
pad