Mountain Buggy swift - Seat and Safety Features; Seat Recline Adjustment; Safety Wrist Strap Usage

6
Safety Wrist Strap
Bumper Bar
Usethesafetywriststrapinallsituations.Ensurethatthe
loop of the strap is located around the wrist of the person
pushing the buggy.
Care should be taken if the buggy is used down hills
or in strong winds.
wrist strap
Seat Recline
The seat back can be reclined to any position between the
upright and fully reclined positions.
To recline
Pull on the buckles to slide the straps through the buckles
and recline the seat.
To raise
Pull straps through the buckles to raise the seat angle.
buckles
strap
To attach
1. Pull fabric back between hinge joint and sunhood
lug to expose part of the frame.
2. Fitsnap-lockofbumperbartoframe.
3. Closelocksonbothsidestosecurelylockontoframe.
WARNING: The bumper bar does not
replace safety harness. Secure infant
in safety harness at all times. Do not use
the bumper bar as a carrying handle.