Mountain Buggy swift - Removing and Refitting Seat and Sunhood

8
Removing Seat and Sunhood
Sunhood removal
1. Detach sunhood from sunhood lugs on either side
of buggy frame.
2. Unfasten sunhood domes that attach the sunhood
to buggy frame and to buggy seat back.
To ret sunhood
Followremovalinstructionsinreverse.
sunhood
lug
sunhood
clip
Seat removal
1. Unfastenseatdomesfromframealongsidetubes(4
domeseachside).
2. Unfasten strap underneath seat and those attached
toframe(1strapeachside).
3. Unfastenthedomeswhichfastenthesunhoodand
seat together.
To ret seat
Followremovalinstructionsinreverse.Ensurefabricis
domedOVERframe.