N O I T U L O SM E L B O R P
C hec k there i s ample clean, fr esh fue l in t he ta nk.
Engine w ill not start
C hec k the cutter bl ade is not fouling the ground preventing free rotation.
C he ck the Operators Presence Control (O PC) lever is fully released.
Engine w ill not stop
Remove spark plug lead to stop engine using insulated gl oves and refer to dealer.
Stop the engine and disconnect the spar k plug lead using heat resistan t gloves.
C hec k blade attach me nt bolt is tight.
Fa il ure to cut gr as s properly
C hec k condition of bl ade. If s eriously worn or dama ged repl ace with a new one.
Stop the engine and disconnect the spar k plug lead using heat resistan t gloves.
C hec k and make s ure there is no build up o f gras s inside the ca sing.
C he c k to ensure the engine is r unning a t the correc t speed, (a pproximately 3000rpm).
Raise the height of cut to increase airow.
Do not cut more than one third o the length of the grass at any one time.
Fa il ure to collect grass properly
Machine vibrates e xc essi ve ly
This will c ertainly indicate that the blade has become badly da mag ed. St op the e ngine, disconnect the
spark plug lead and exa mine the blade asse mbly. Refer to your local dealer.
FAULT FINDING
CERTIFICATE OF CONFORMITY
EC DECLARATION OF CONFORMITY
The company ................................................... GGP ITALY SPA - Via del Lavoro, 6
31033 Castelfranco V.to (TV) ITALY
Multiclip 501SP type MCS 504 TR
48 cm
GGP • WBE 0702
SNCH, 11 route de Luxembourg
L-5230 SANDWEILER
98/37/EEC
89/336/EEC ~ 2004/108/EC - 2000/14/EC
ANNEX VI
93 dB(A)
94 dB(A)
EN 836 - EN 292-2- EN 1033 - EN ISO 3767
EN ISO 14982
79 dB(A)
9,5 m/s
2
Certify that the lawnmower, walk behind with
combustion engine ...........................................
Widht of cut .....................................................
Engine ..............................................................
Tested by .........................................................
Conforms to the specications of directives .....
Castelfranco Veneto (TV) - ITALY 01-10-2008
Conformity assessment procedure followed ......
Measured sound power level ............................
Guaranteed sound power level .........................
Reference to harmonised standards..................
Sound pressure level at the ear measured in compli-
ance with 81/1051/EEC ..............................................
Viration level at the handle (EN 1033) .......................
S. Ferrari (General Manager)
To Next Page
Loading...
Need help?
General
