Movacolor MCTC - Closed Loop Configuration and Production

48
MCTC manual
7.2.1 Configuration
The MCTC needs to be configured as double station, see chapter 6 for more information about
multicomponent configuration. MCTwin functionality is not available when a MCWeight is configured in the
system
MCBalance settings:
See chapter MCBalance component configuration for more detailed MCBalance configuration.
Enabling the MCTwin software operation, the material function has to be set to Regrind (R) using the recipe
editor. From the horizontal menu bar, press the recipe button.
Select material function “Regrind” (1) and press the save button.
Next configure the regrind parameters via the “Regrind Configuration menu”
Regrind component configuration:
 Be sure the right component is selected by using the button.
1.
Max fill level
2.
Fill level for Nominal regrind
dosing
3.
Maximum time used for one fill
sequence
4.
Time between fill retry, when
no regrind is available.
5.
% of additional regrind when
hopper level is above Regrind
level
6.
Manual fill
7.
Advanced loader settings
2
3
4
5
6
1
7
1