Injection molding – closed loop - gravimetric mode
Actual production data:
Using the toggle button , you can switch between production settings and production data.
1. Set and actual output: Set.: Re-calculated output (% kg/h, gr/sec).
Act.: Actual additive output (% kg/h, gr/sec).
actual additive output is only visible after the first automatic RPM adjustment.
2. Speed: Actual motor speed (RPM).
3. Hopper weight: Material weight in the hopper.
4. Time: Set dosing time (sec), when working TIMER input mode.
The average dosing time (sec), when working in RELAY input mode.
5. Act. Time: Count down of the actual dosing time (sec).
To Next Page