4
USING THE SMARTWATCH:
Q. WHY IS THE WATCH NOT RESPONDING
DURING INITIAL SETUP?
When purchased, the watch may be in “shipping
mode.” To activate the watch, charge the watch for
at least four hours, and then press and hold the watch
button until lights move around the edge of the dial.
Activation can take 5 to 10 seconds.
Q. HOW DO I SET THE TIME?
Gently pull out the watch crown until it clicks. Rotate
the crown in either direction to move the hour and
minute hands to the correct time, and then push it back
in.
Q. CAN THE WATCH LIGHT UP TO DISPLAY THE
TIME WHEN IT’S DARK?
Yes. Press the watch button once for Digital Time view,
which shows the time using the watch LED lights. The
lights illuminate to show the current time as determined
by the phone app. The icon and the hour light
illuminate. The minute light blinks.
For example, at 10:09, the 10 o’clock light illuminates
and the 1 o’clock light illuminates and then quickly
blinks four times to let you know it is four minutes past
10:05, or 10:09. At 10:10, the 10 o’clock light
illuminates and the 2 o’clock light illuminates (without
blinking) to indicate it is exactly 10:10.
If the hour and minute are represented by the same
light, the light illuminates to show the hour, and then
blinks once to indicate the minute. If it is exactly on
the minute (for example, 10:50), the light does not
blink again. Otherwise, it quickly blinks the number of
minutes past the marker. At 10:51, the 10 o’clock light
illuminates, blinks once, and then quickly blinks again,
to represent 10:51.
Q. HOW DO I TRANSFER OWNERSHIP OF THE
WATCH, OR USE THE WATCH WITH A DIFFERENT
PHONE?
1. In the app, tap the SETTINGS icon. Then tap either
SIGN OUT or REMOVE WATCH.
2. Respond to any dialog boxes that open. The app
returns to the login screen.
3. If the watch is actively connected to the phone
when you sign out or remove the watch, the watch
automatically resets to factory settings.
If the watch is not actively connected to the phone
when you sign out or remove the watch, reset the
watch to factory settings using the following steps:
a. Press and hold the watch button for 22
seconds.
b. After all lights cycle clockwise once, release
the button.
c. The lights cycle counterclockwise, blink
once, and then the watch resets.
NOTE: After the factory reset, the lights cycle
clockwise, indicating the watch is in Bluetooth pairing
mode.
If you are using Android, the watch is now unpaired
and ready to pair with a different phone.
If you are using iOS:
a. Open the phone SETTINGS menu, then tap
BLUETOOTH.
b. Tap the I icon next to the watch name.
c. Tap FORGET THIS DEVICE. The watch is
now unpaired and ready to pair with a
different phone.
Q. WHAT IS THE DIFFERENCE BETWEEN SIGN
OUT AND REMOVE WATCH?
SIGN OUT allows you to delete sign-in with a different
account. Signing in with a new account after signing
out deletes your locally-stored user data, such as app
settings and activity information.
REMOVE WATCH allows you to stay signed in and
associate a new watch with your account.
Q. CAN I USE MY WATCH TO ANSWER A CALL
OR TEXT?
No, the watch only receives notifications of calls and
texts from your smartphone. Use your phone to answer
calls or respond to texts.
To dismiss a notification or decline a call, press the top
watch button once.
To Next Page
Loading...
