17
APPENDIX.1 Troubleshooting
1. Red light flashes - battery is too low.
2. The indicator light flashes and the Rotator does not run - the internal failure of the rotator.
3. The rotating base is loose - the rotating base is not fixed on the main body, if loose, it can be
tightened.
4. The camera is shooting, the indicator light is not flashing.
● There is a problem with the camera settings. Please turn off the mute shutter, turn off the
live display (Canon, Nikon), turn on the flash'
● the synchronizer is not connected.
5. During the shooting, the indicator light goes out and does not flash for a long time. Check
whether it’s overload.
6. Set the end point/start point. The rotator does not turn
● Check if the synchronization line is connected.
● Restart the App.
To Next Page