10
Outlet transion piece, FBO
Intended to be used for simple and opmised transion
when a round outlet duct is to be connected. Supplied
complete with installaon components.
Designaon:
FBO 037 - Fits FB 076.
FBO 075 - Fits FB 106.
FBO 220 - Fits FB 206 and 406.
FBO 400 - Fits FB 706.
FBO 750 - Fits FB 1506.
Technical informaon
Material: PVC membrane reinforced with polyester
mesh
Weight: ~0.22 - 0.44 lb
Outer dimensions FBD 055: Ø6
7/16
x 5 x
1/64
Outer dimensions FBD 110: Ø8
1/16
x 5 x
1/64
Outer dimensions FBD 220: Ø10 x 5 x
1/64
Outer dimensions FBD 400: Ø15
7/8
x 5
7/8
x
1/64
Outer dimensions FBD 750: Ø19
13/16
x 5
7/8
x
1/64
Connecon, FBD
Intended to be used to prevent the spread of structu-
re-borne noise. Supplied complete with hose clip.
Designaon:
FBD 055 - Fits FB 037 and 055.
FBD 110 - Fits FB 075 and 110.
FBD 220 - Fits 220.
FBD 400 - Fits FB 400.
FBD 750 - Fits FB 750.
Vibraon damper, FBV
Intended to be used to prevent the spread of vibraons,
which can result in increased noise levels.
Designaon:
FBV 110- is compable with FB 076 - FB 206.
FBV 750- is compable with FB 406 - FB 1506.
Technical informaon
Material: EPDM rubber with mounng components
made of chromated steel.
Weight: ~0.55 lb
Outer dimensions FBV: Ø1
15/16
x 1
3/16
x M10
Technical informaon
Material: Steel (SS-EN 10025 S235JR)
Surface treatment: Hot-dip galvanisaon
Weight: ~2.5 - 11.5 lb
Outer dimensions FBO 037: 6
3/4
x 9
1/16
x 7
11/16
(Ø6
5/16
)
Outer dimensions FBO 075: 8
3/16
x 9
15/16
x 9
5/8
(Ø7
7/8
)
Outer dimensions FBO 220: 8
11/16
x 12
1/4
x 10
1/16
(Ø9
13/16
)
Outer dimensions FBO 400: 11 x 15
13/16
x 13
9/16
(Ø15
3/4
)
Outer dimensions FBO 750: 12 x 17
3/8
x 17
1/2
(Ø19
11/16
)
Safety switch, SSB 750
Safety switch with lockable with locking lever. Supplied
with 2 lead-in M25
Designaon:
SSB 750 - Fits all sizes.
Technical informaon
Material: PVC
Weight: 0.66 lb
Outer dimension: 5
7/16
x 2
1/2
x4
5/8
mm