Movincool 24HFU - OPERATION; Control Panel Overview

MOVINCOOL 24HFU / 24HFU-1 OPERATION PAGE 8
OPERATION
Before operating the unit, it is important to familiarize yourself with the
basic controls located on the control panel.
Listed below are 2 types of control panels. Carefully review the figure
pertaining to your model for proper configuration.
➀ Control Switch: Used to select desired operation mode (OFF/
FAN/COOL)
➁ “FULL TANK” Lamp: Turns on when drain tank is full
➂ “THERMOSTAT”: Used to control operation according to inlet
air temperature (Model 24HFU-1 Only)
Spot Cooling Systems 24HFU
Spot Cooling Systems 24HFU-1
FULL
TANK
FULL
TANK
OFF
OFF
FAN
AN
OFF
OFF
FAN
AN
COOL
COOL
THERMOST
THERMOST
AT
1
2
3
4
5
6
7
COOL
COOL
24HFU 24HFU-1