Moxa Technologies ioThinx 4510 Series - Page 7

- 7 -
Step 2: Align the 45M module side by side with the head/CPU module
and then push the 45M module until it touches the DIN rail. Next, apply
more force until the module clips on to the DIN rail.
NOTE
After the module is firmly attached to the DIN
rail, the module
connections to the internal bus will be established.
NOTE
The maximum number installing on the ioThinx 4510 for 45MR
modules is 32 pcs and that does not support 45ML modules.
For information on the use of the 45MR module with ioThinx
4533, please refer to this website
(
https://iothinxcalculator.moxa.com/). If the website is invalid,
be sure to contact MOXA to confirm product installation.
Removing a 45M Module from a DIN Rail
Step 1:
Use your finger to lift the
release tab on the lower part of the
module.