- 2 -
Overview
The MGate MB3180 is a 1-port Modbus gateway that converts between
Modbus TCP and Modbus ASCII/RTU protocols. It can be used to allow
Ethernet masters to control serial slaves, or to allow serial masters to
control Ethernet slaves. Up to 16 TCP masters and 31 serial slaves can
be connected simultaneously.
Package Checklist
Before installing the MGate MB3180 Modbus gateway, verify that the
package contains the following items:
• 1 MGate MB3180 Modbus gateway
• 4 stick-on pads
• Document & Software CD
• Quick Installation Guide
• Product Warranty Statement
• Power adapter
Optional Accessory
• DK-35A: DIN-rail mounting kit (35 mm)
• Mini DB9F-to-TB Adaptor: DB9 female to terminal block adapter
• DR-4524: 45W/2A DIN-rail 24 VDC power supply with universal 85
to 264 VAC input
• DR-75-24: 75W/3.2A DIN-rail 24 VDC power supply with universal
85 to 264 VAC input
• DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to
132 VAC/176 to 264 VAC input by switch
Notify your sales representative if any of the above items is missing or
damaged.
use a power adapter supplied by UL Listed External Power
Supply (The power output meets SELV and LPS and