MPE CHAIN-VEY - 5. Tension Switch; 6. Solenoid Valves

25
5. Tension Switch
The tension/limit switch...
Operating voltage: 24 - 400V AC/DC
6. Solenoid Valves
The solenoid valves are used to control the pneumatically operated components.
The solenoid valves are supplied in either 24VDC or 110VAC depending on customer
requirements.
Type
5 Port 2 Position
Flow
Cv 1.39 [Kv 1.63]
Port Size
1/4" NPT
Lubrication
Not Required
Pressure Range
22-120 PSI [1.5-8.3 bar]
Temperature Range
23-140°F [-5 to 60 °C]
Voltage Range
±10%
Power Consumption
24VDC:2.5W 110VAC:8.5VA
Insulation
F Class
Ingress Protection
IP65 (DIN 40050)
Connection
DIN/LED Connector or Grommet
Max Frequency
4 cyles/sec
Min. Activate Time
0.05 sec