Conveyor Piping:
Piping:
Chain-Vey conveying pipe is seamless 6" sch10 stainless steel pipe. The pipe OD is 6.625”
[16.83cm] with a wall thickness of 0.13” [0.34cm]. The weight of the pipe is approximately 9.29
lbs/ft [14.2 kg/m]
Elbows:
Conveying elbows are used for gradual transitions in the direction of chain travel. The elbows are
bent seemless 6” sch10 stainless steel pipe. The pipe O.D. is 6.625” [16.83cm] with a wall
thickness of 0.13“ [0.34cm]. The pipe is bent uniformly to keep the pipe I.D. concentric, and avoid
any ovality. The standard pipe elbow is 90° with a centerline radius of 60” [152.4cm]. Elbows are
also available with bends between 5°-90° and a centerline radius of 60”-72” [152.4-182.88cm].
The weight of the standard elbow is approximately 98 lbs [44.5 kg].
To Next Page