21
GB
BREWING CAPPUCCINO
CAUTION! Before preparing CAPPUCCINO,
adjust the amount of steamed milk accord-
ing to your preferences by turning the milk
dispensing knob (23) to the left to get more
steam or to the right to reduce the amount
of steam (Fig. 4). The intensity of steam can
also be adjusted during the steaming pro-
cess.
1. Mount the selected filter basket (13) in the portafilter (10), fill it with coffee and install it in the
espresso machine.
2. Ensure that there is enough water in the water tank (15) and enough milk in the milk contain-
er (19).
3. Place an appropriate cup(s) and start the brewing process with the appropriate button (2c)
or (2d).
4. The brewing process is signalled by a control light on the button used.
5. When all of the control lights lit on again, the coffee brewing is finished.
BREWING LATTE
CAUTION! Before preparing LATTE, adjust the amount of steamed milk according to your preferences by turn-
ing the milk dispensing knob (23) to the right to get more steam or to the left to reduce the amount of steam
(Fig. 4). The intensity of steam can also be adjusted during the steaming process.
1. Mount the selected filter basket (13) in the portafilter (10), fill it with coffee and install it in the
espresso machine.
2. Ensure that there is enough water in the water tank (15) and enough milk in the milk contain-
er (19).
3. Place an appropriate cup(s) and start the brewing process with the appropriate button (2e)
or (2f).
4. The brewing process is signalled by a control light on the button used.
5. When all of the control lights lit on again, the coffee brewing is finished.
MILK STEAMING
The espresso machine makes it possible to prepare only steamed milk for another beverage,
e.g. macchiato, hot chocolate, tea, etc. The process of feeding and steaming milk takes place
after pressing the “Cappuccino” (2d) button twice. During this process, the control lights on
the (2c) and (2d) buttons will light up. Pressing the (2d) button again will stop the milk feeding
and steaming process.
CAUTION! The released steam jet is hot. Handle with care. Risk of burns!
SETTING THE QUANTITY OF ESPRESSO BREWED
1. Press and hold the single “Espresso” coffee selection button (2a) for 3 seconds when setting
the quantity for single ESPRESSO or the double “Espresso” selection button (2b) when set-
ting the quantity for double ESPRESSO The espresso machine starts pouring brewed coffee.
Fig. 4
To Next Page
Loading...
Need help?
General
