12
GB
While using the vacuum cleaner, adjust the suction power with (3) and (4) buttons. There
are 5 suction force level indicators on the vacuum cleaner which depict the recommended
application of each level (5):
MIN – upholstery and cushions/pillows
textiles, net curtains
optimal vacuum cleaning (low noise and high suction power)
carpets and rugs
MAX – hard floors, heavily soiled carpets and rugs
The indicators light up and go off when selected with (3) and (4) buttons.
CAUTION! If the suction pipe is blocked or the dust bag is full, the bag filling indicator (6) turns red. Replace the
dust bag or remove the cause of suction pipe blocking.
4. To ensure optimum appliance setting upon the completion of work, use the guide (7) in the
rear of the vacuum cleaner. Place the rail in the rear of the floor-carpet attachment with con-
nected suction hose and telescopic pipe on the guide. The second guide that facilitates vacu-
um cleaner storage in the vertical position is under the bottom of the appliance.
ACCESSORIES OVERVIEW
FLOOR-CARPET ATTACHMENT
Designed for cleaning large flat surfaces. It is equipped with castors that facilitate movement
in difficult to access places and a flexible joint, connecting it with the suction hose, which
allows directing at various angles. When you press the button on the upper attachment ho-
using (switch it to the brush mode), a row of rigid bristles will appear on the bottom to facili-
tate cleaning hard floors.
PARQUET BRUSH TOOL
Intended for cleaning all surfaces prone to scratching, e.g. wooden floors, varnished parquet
floors, or flooring panels.
SLIDE CREVICE TOOL
Used for cleaning difficult to access areas, such as in room corners, by and below pieces of
furniture and in bends and slits. It is also perfect for cleaning computer keyboards, drawers,
radiators or window frames.
To Next Page
Loading...
Need help?
General
