MPMan MP724 - Connecting Headphones

Page 32 Optional Connections
English
To connect the tablet to the TV:
1. Plug the small end of the HDMI cable into the mini
HDMI connector of the tablet.
2. Plug the large end of the HDMI cable into the HDMI
port on the TV.
3. Turn on the TV, and set its display mode to the HDMI
port that the tablet is connected to.
The tablet’s display will be output to the TV screen.
 Ifyouneedhelpsettingthedisplaymodeofthe
TV,pleaserefertothedocumentationprovided
bytheTVmanufacturer.
 IfthereisnosoundfromthetabletonyourTV,
you may need toset the HDMI switch sound
settings.
Connecting Headphones
Connect a pair of headphones (or earphones) to the
tablet to enjoy media in private.
Lower the volume level of the tablet before connecting
headphones, and then slowly raise the volume to a
comfortable listening level.
 The headphones must have a 3.5 mm (1/8 in) plug.
 When headphones are connected, speaker output
will be disabled automatically.
 Hearing experts advise against the constant
useofpersonalstereosplayedathighvolume.
Constantexposuretohighvolumescanleadto
hearingloss.Ifyoushouldexperienceringing
intheearsorhearingloss,discontinueuseand
seekmedicaladvice.