MPPT ML2430 User Manual

ML Maximum Power Point Tracking (MPPT) Series
ML2420
20A
20A
ML2430
12V/24V
30A 40A
ML2440
100V(25℃)，90V(-25℃)
User Manual
ML2420-ML2430-ML2440
Solar Charge and Discharge Controller
Model
Battery voltage
Max. solar panel voltage
Charging current
Discharging current
Material Code：1.1.24.01459
Version: 1.01
The above information is subject to change without prior notice.

MPPT ML2430 Specifications

General

Model	ML2430
Rated Voltage	12V/24V Auto
Max. Charge Current	30A
Max. PV Input Voltage	100V
Operating Temperature	-20°C to +60°C
Max PV Open Circuit Voltage	100V
Max. PV Input Power	390W (12V), 780W (24V)
Maximum PV Input Power	390W (12V), 780W (24V)
Protection	Overload, Short circuit, Reverse Polarity
Humidity	≤95% (Non-condensing)

Summary

Safety Instructions

Product Introduction

Introduction to Maximum Power Point Tracking Technology

Explains MPPT technology and its advantages over conventional charging methods.

Product Installation

Installation Precautions

Provides essential safety advice and precautions before installing the solar charge controller.

Wiring Specifications

Installation and Wiring

Guides on the physical installation and electrical wiring of the controller, including safety warnings.

Product Operation and Display

System Parameter Settings

Explains how to enter and adjust system parameters like battery type, voltages, and charging settings.

Product Protection Function and System Maintenance

Protection Functions

Lists and describes various protection mechanisms built into the controller against faults and damage.

System Maintenance

Abnormality Display and Warnings

Details abnormality codes displayed on the LCD and corresponding LED indicator status.