4
Installation Instructions and Owner’s Manual
Unvented LP-Gas Vent Free Heaters
Product Features
Figure 1
SAFETY DEVICE
IGNITION SYSTEM / BATTERY INSTALLATION
(AA Battery included)
To install or replace battery unscrew the igniter cap
(red button), insert battery positive (+) terminal up
and replace cap.
(AA Battery included)
THERMOSTATIC CONTROL
BLOWER FAN CONTROL SWITCH OPERATION
LOCAL CODES
Installation must conform to local codes or in the
UNPACKING
FRESH AIR FOR COMBUSTION AND
VENTILATION
WARNING
ESTABLISHING ADEQUATE VENTILATION
National Fuel Gas
Code, NFPA 54/ ANSI Z223.1, Section 5.3, Air for
Combustion and Ventilation
Unusually Tight Construction
Ventilation Air
from Outdoors
where:
2
windows and doors, and
If your home does not meet all of the three criteria
Determining the Type of Heater Location
Space
The National Fuel Gas Code, NFPA 54/ ANSI Z223.1
3
3
Ignitor Button
Control Knob
Grill
Front Panel
Burners
Heater
Cabinet
Fan Blower
Switch
(located on back
of heater)
To Next Page
Loading...
