Mr. Heater MHVFGH30LPBT - Wall Mounting Procedures; Attaching to Wall Studs; Attaching to Wall Anchors; Clearance Maintenance During Mounting

7
Installation Instructions and Owner’s Manual
Unvented LP-Gas Vent Free Heaters
Figure 4
FASTENING HEATER TO WALL
Mounting Bracket
-
Figure 5
Figure 6
WARNING: Maintain minimum clearances shown in
Figure 7
-
Note:
Adjoining Wall
18” Min.
SEE CLEARANCE
SPECIFICATIONS ON PG. 3
16” (Lg)
12-9/64” (Sm)
Mark mounting hole locations
and drill holes where indicated.
Allow for minimum clearances
Left
Side
Side
from sides
Floor
Mounting
Bracket