2 Safety
Maschinenfabrik Reinhausen GmbH 201810 1800059/09 ENRS
Personal protective equipment
Loosely worn or unsuitable clothing increases the danger of becoming
trapped or caught up in rotating parts and the danger of getting caught on
protruding parts. This increases the danger to life and limb.
▪ All necessary devices and personal protective equipment required for the
specific task, such as a hard hat, safety footwear, etc. must be worn. Ob-
serve the section "Personal protective equipment" [►Section 2.4, Page
12].
▪ Never wear damaged personal protective equipment.
▪ Never wear rings, necklaces, or other jewelry.
▪ If you have long hair, wear a hairnet.
Work area
Untidy and poorly lit work areas can lead to accidents.
▪ Keep the work area clean and tidy.
▪ Make sure that the work area is well lit.
▪ Observe the applicable laws for accident prevention in the relevant coun-
try.
Protection against electric shock
If the terminal box cover of the protective relay hangs from the wire on the
side of the enclosure, this can lead to damage to the wires. This poses a
danger to life and limb.
▪ Always remove the terminal box cover with wire from the protective relay
for any work which involves opening the protective relay.
▪ Remove the slotted head screw for potential tie-in and remove the termi-
nal box cover with wire.
Working during operation
The product may only be operated in a sound, operational condition. Other-
wise it poses a danger to life and limb.
▪ Regularly check the operational reliability of safety equipment.
▪ Comply with the inspection work, maintenance work and maintenance in-
tervals described in this technical file.
Explosion protection
Highly flammable or explosive gases, vapors and dusts can cause serious
explosions and fire. This increases the danger to life and limb.
▪ Do not install, operate or perform maintenance work on the product in ar-
eas where a risk of explosion is present.
To Next Page
Loading...
