MR RS 2003 - Drying the Transformer in the Transformer Tank

2 Safety
Maschinenfabrik Reinhausen GmbH 201814 1800059/09 ENRS
NOTICE
Damage to protective relay, on-load tap-changer and trans-
former!
If the protective relay is dried in a furnace, this may cause damage to the
protective relay and restrict its correct function.
► Do not dry protective relay in a furnace.
2.5.2 Drying the transformer in the transformer tank
If drying takes place in the transformer tank, the protective relay can remain
fitted during the drying process.