Why is the ring signal failing on all telephones connected to MRC Marine Equipment?
If the ring signal is failing on all connected telephones, check the cable connector first. If the problem persists, consider replacing the switching regulator board.
Why is the fail alarm ringing continuously on my MRC MCX-5000B Marine Equipment?
If the fail alarm is continuously ringing, check the 5A fuse of the switching regulator unit.
What to do if the run lamp of MRC MCX-5000B Marine Equipment display unit is flickering?
If the run lamp on the display unit is flickering, it could be due to a software program issue. Try pushing the reset button. If that doesn't resolve the problem, the CPU board may need to be replaced.
General| Power Supply | 13.8 VDC |
|---|---|
| Weight | 1.5 kg |
| Channels | All USA, Canadian, and International marine channels |
| Output Power | 25 Watts (High) / 1 Watt (Low) |
| Modulation | FM |
Explains connections for various telephone types, including external bells and signal relay boxes.
Illustrates the wiring concept for intrinsically safe telephones and peripheral devices.
Lists available programming functions, including extension number, dial, ARS, group, and priority settings.
Provides precautions for programming and initial setup steps like setting dial digit and extension numbers.
Guides on selecting dial digit format and editing extension numbers within the MCX-5000 system.
Details setting priority call levels and applying call interrupt functionality based on priority.
Guides on checking system failures, including buzzer activation, fault lamp, and information display.
Step-by-step guide for resetting the system password, including minimum and maximum digit requirements.
Provides essential cautions before maintenance and a step-by-step troubleshooting guide for common issues.
Details the configuration of the MCX-5000 series auto-exchanger, including main components.
Explains the role of the CPU board in controlling the system, setting time, and monitoring I/O boards.
Describes the dial tone board's function in generating tones and signals for the system.
Explains the functions of the trunk board and I/O switch board in handling calls and subscriber ports.
Lists inspection items, methods, and requirements for testing the auto-exchanger system.
Details inspection items, methods, and requirements for testing the auto-telephone units.
To Next Page
