MRC Prodigy Advance 2 User Manual

Page: 4
Specications and Features
Input: 15-16 volts regulated DC, 3.5 Amps universal switching power
supply (good for both USA and Europe)
Output: DCC signal with 14.5 V amplitude, for HO and N scales
Scales larger than HO may need an MRC Power Booster
Maximum Current: 3.5 Amps
Maximum number of Cabs: Use up to 99 Cabs
Address Capability: 2-digit (1-127) or 4-digit (128-9,999)
Speed Steps: 14/28/128
Accessory Functions: 28 (F0-F28)
Advanced and Universal Consisting
Program Loco on Program Track
Program Loco on Main Track
Read Loco on Program Track
System Menu Summary Chart
Most functions are initiated by pressing their associated keys. However, there are ten
functions initiated by pressing the SYS key followed by a numeric key (0-9). The following
table summarizes these ten functions and the information about each function is found in
the manual.
Press SYS twice to display the software version for your Prodigy
KEYS FUNCTIONS
SYS + 0 Clear routes
SYS + 1 Set me - Fast Clock
SYS + 2 Set me rao - Fast Clock
SYS + 3 Yard mode on/o (see page 6)
SYS + 4 Set me mode: AM/PM/military - Fast Clock
SYS + 5 Set routes
SYS + 6 View your Cab address and set Cab address
SYS + 7 Set last Cab allowed to program locos on the Main Track
SYS + 8 Set last Cab allowed to program locos on the Program Track
SYS + 9 Set total number of operaonal Cabs

MRC Prodigy Advance 2 Specifications

General

Brand	MRC
Model	Prodigy Advance 2
Category	Control Systems
Language	English