AUTOMATIC OPERATION
Connect to power,indoor operation lamp
flash.
1. Press "MODE" button, select " AUTO "
;
2. Press the button "▲" and "▼", set
temperature you want, generally it is
among 62°F(17°C)~86°F(30°C);
3. Press "ON/OFF" button, operation
lamp is on, the air-conditioner work in
auto mode, indoor fan is auto, and can
not be changed. Auto is displayed on
LCD. Press ON/OFF button again to stop.
4. Economy operation is valid in auto
mode.
5. In event of power interruption such as
a blackout, the air conditioner stops once.
But it restarts automatically and performs
previous operation when the power
supply is resumed.
7
7. USING METHOD
NOTE: Press and hold UP and DOWN
buttons together will alternate the
temperature display between the °C & °F
scale.
⑩ Swing button:
Used to set the airflow direction. Hold
down this button for 2 seconds to
activate auto swing feature.
11 Economy operation button :
press this button, the indoor unit
operates in economy mode, press again,
exit this mode (it may be ineffective for
some models)
12 Fan speed button:
press this button consecutively, the fan
speed will circle as follow:
13 Lock button(hidden):
When you push the LOCK button, all
current settings are locked in and the
wire controller does not accept any
operation except that of the LOCK
button. Use the lock mode when you
want to prevent setting from being
changed accidentally or play fully. Push
the LOCK button again when you want
to cancel the LOCK mode.
To Next Page
Loading...
Need help?
General
