MRP hazzard - IMPORTANT CONSUMER SAFETY INFORMATION; WARRANTY; SHRED LEVER ADJUSTMENT

Congratulations on your purchase of another cutting-edge
suspension product from MRP! Please read this manual completely
before you ride. It will help you to set your shock for optimum
performance.
IMPORTANT CONSUMER SAFETY INFORMATION
WARNING: RIDING A BIKE IS DANGEROUS. NOT PROPERLY
MAINTAINING OR INSPECTING YOUR BIKE AND ITS COMPONENTS
IS EVEN MORE DANGEROUS. IT IS ALSO DANGEROUS TO NOT READ
AND FOLLOW THESE INSTRUCTIONS.
Thank you for choosing MRP. This owner’s manual is your
reference guide to using and fine-tuning your shock for optimum
suspension performance and comfort. It also provides important
information about the proper maintenance of your shock. Carefully
read this manual before installing your shock. If you need further
assistance, our experienced team is able to advise and assist you to
find the exact set up to meet your personal needs.
The shock is an important part of your mountain bike and
this owner’s manual explains how to install and use it properly. We
recommend that it be installed by a qualified bicycle mechanic.
Improperly installed shocks might cause serious harm to you and may
severely damage your mountain bike. Never take any chances with
your safety. Before installing and using your new shock, carefully read
this owner’s manual to learn the correct installation and adjustment
procedures and avoid the consequences of an incorrect installation or
improper adjustment.
When your shock requires an oil change or other internal
maintenance, MRP and experienced suspension service centers are
best qualified to provide the necessary service or repairs.
WARRANTY:
MRP suspension products are the highest quality and as such are
warranted to be free from defects in materials and workmanship
for a period of one year from the date of purchase for the original
purchaser. If date of purchase cannot be verified by product
registration or proof of purchase then the warranty is one year
from the date of manufacture. On receipt of the product by MRP,
if it is found to be defective, MRP will determine replacement or
repair of the product at its sole discretion. MRP shall not be liable
for any indirect, special or consequential damages. Warranty
does not apply to any product that has been installed improperly
eectively absorb impacts, thus making the ride harsh.
To reduce the high-speed compression threshold, thus
decreasing the level of force to activate the blow-o valve, turn the
silver high-speed compression adjuster knob counterclockwise
(unscrew). When the high-speed setting gets too soft, the suspension
will use more travel upon impacts and become more prone to
bottoming out.
IMPORTANT NOTE:
WHEN TURNING THE HIGH-SPEED COMPRESSION ADJUSTMENT KNOB, THE
LOW-SPEED COMPRESSION ADJUSTMENT KNOB WILL FOLLOW ALONG WITHOUT
AFFECTING ITS SETTING.
SHRED LEVER ADJUSTMENT
The Hazzard features the Shred Lever, a two position switch
that quickly boosts low-speed compression damping significantly in
the “on” position. Between the shock body and reservoir (piggyback),
the Hazzard has two available flowpaths for the damping oil. The
Shred Lever allows you to toggle between them. In the “on” position
(when the lever pushed towards a positon parallel with body and
reservoir), oil must pass through an additonal shim that provides firm
resistance to low-speed compression events.
The Shred Lever is best utilized to improve eciency by
reducing pedal bob and wasted energy on long, smooth climbs or
particularly tame terrain. Although there is no risk of damage if the
shock is ridden aggressively while the feature is “on,” it will result
in a harsh ride over very rough terrain. For that reason, we do not
recommend you descend while the Shred Lever is on.
SHRED LEVER
“OFF” POSITION
SHRED LEVER “ON”
POSITION