2 Safety
VST_BA1_1.0 | Version 1.0 | 07/2019
The risk of accidents is reduced if the manufacturer of the complete systems
observes the following points:
Adherence to the statutory regulations regarding accident prevention,
occupational safety and environmental protection.
Provision of all documents required for installation and maintenance.
Monitoring of the cleanliness of the control unit and of the complete system.
The responsibilities for the assembly of the control unit must be clearly specified
by the manufacturer of the complete system. The assembly and maintenance
staff must be regularly instructed.
And work and maintenance performed on electric energy sources is always
associated with possible dangers. Persons not familiar with these kinds of devices
and systems may cause harm to themselves and others.
The installation and maintenance staff of a system with electric devices must be
instructed by the manufacturer regarding potential dangers, required safety
measures and applicable safety provisions before beginning work.
To Next Page
Loading...