4 Transport / Storage
VST_BA1_1.0 | Version 1.0 | 07/2019
4 Transport / Storage
4.1 Transport
The product must be packed in suitable transport packaging and secured against
sliding around. During transport, the statutory provisions regarding securing loads
must be observed.
If the control unit falls down, it may no longer be used and must be returned to MRS
to be checked.
4.2 Storage
Store the product in a dry place (no dew), dark (no direct sunlight) in a clean room
which can be locked. Please observe the permissible environmental conditions in the
data sheet.
To Next Page
Loading...