5 Intended use
VST_BA1_1.0 | Version 1.0 | 07/2019
5 Intended use
The control unit is used to control one or multiple electric systems or sub-systems in
vehicles and work machines and may only be used for this purpose. The control unit
may only be operated in industrial applications.
You are within regulations:
If the control unit is operated within the operating ranges specified and approved
in the corresponding data sheet.
If you strictly adhere to the information and sequence of tasks described in these
operating instructions and do not engage in unauthorized actions which may risk
your safety and the functionality of the control unit.
If you comply with all specified safety instructions
DANGER DUE TO UNINTENDED USE!
The control unit is only intended to be used in vehicles and work machines.
An application in safety-relevant system parts for personal protection is not
permitted.
Please do not use the control unit in explosive areas.
Misuse
Use of the product in conditions and requirements differing from those specified
by the manufacturer in technical documentation, data sheets and operating
instructions.
Non-compliance with the safety information and information regarding assembly,
commissioning, maintenance and disposal specified in the operating instructions.
Conversions and changes of the control unit.
Use of the control unit or parts thereof which are damaged or corroded. The same
goes for seals and cables.
Operation in a condition with access to live parts.
Operation without the safety measures intended and provided by the
manufacturer.
MRS only guarantees/is liable for the control unit corresponding to the published
specifications. If the product is used in a way not described in these operation
instructions or in the data sheet of the control unit in question, the protection of the
control unit will be impaired, and the warranty claim is void.
To Next Page
Loading...