4-9 installing method for ISOFIX attachment
Notice: Child safety seats can also be used
with the ISOFIX attachment guider.
The installation is more convenient, please
clip the ISOFIX attachment guide on the
ISOFIX attachment anchor point on the
ISOFIX attachment
automobile, and the make notch faces
upward
Notice: If your car seat can adjust the angle,
pls adjust the car seat angle to the
appropriate position, it will be more
convenient for ISOFIX attachment
installation.
1.Press ISOFIX attachment lock released
button and ISOFIX attachment 2nd lock
button (as shown in Figure 19) at the same
time, then push ISOFIX attachment out.
18
19
20
21
2.Grab the child seat with both hands, then push the
two ISOFIX into the ISOFIX guider until the ISOFIX is
stuck on both sides, and hear click.When the ISOFIX
is locked, pls push the child safety seat vigorously in
Instruction
Manual
To Next Page
Loading...