REMOVING THE AIR MASK
with an empty or partially filled cylinder. Always install a
f
ully-charged cylinder so that the air mask is ready for
use. Complete Inspection and Cleaning and Disinfecting
P
rocedures outlined in this manual. Ensure the entire air
mask is clean and dry. Ensure the facepiece head harness
adjustment straps are fully extended. Place the complete
air mask in the storage case or suitable storage location
so it can be easily reached for emergency use.
For prolonged storage of the air mask, remove the batter-
ies from all electronic components to prevent battery cor-
rosion. Store the units in a cool, dry place.
NOTE: Fresh batteries must be installed in the FireHawk
M7 HUD or I-HUD, FireHawk M7 Power Module, and
NightFighter HUD Transmitter prior to storage of the Air
Mask at cold temperature for an extended period of time.
39
TAL 1705 (L) Rev. 18 - 10082858
To Next Page
Loading...
